- Smallest digital flash-meter for reflective and incident light readings in ambient or electronic flash lighting conditions
- Exposures accurate down to a tenth-of-a-stop for both ambient and electronic flash light readings in full-stop mode. Meter can also display shutter-speeds and apertures in half or third-stop increments to mirror the exposure settings on your camera with a repeat accuracy of +/- 0.1 EV
- At ISO 100, the ambient EV range is 0 to 19.9, flash f/stops range from f/1.4 to f/90.9 with a shutter-speed span of 60-seconds to 1/8000th-of-a-second (1 sec to 1/500th for flash). For cinema applications frame rates can be set from 8 to 128 frames-per-second. ISO sensitivity can be set from 3 to 8000 in third-stop increments
- Pocket-sized, and easy to stow away. The L-308S measures 2.5"W x 4.3"H x 0.9"D (63mmW x 110mmH x 22mmD), and weighs in at 3.4 ounces (95g).
- Includes Lumidisc with pouch, soft case, strap, synchro terminal cap, AA battery.
The pocket-sized Sekonic L-308S FLASHMATE is the smallest and lightest digital light meter in the Sekonic line-up. Designed to read ambient or flash exposures in either reflected or incident modes, the L-308S delivers accurate exposure readings in full, half, or third-stop increments to mirror the exposure displays of most popular cameras. When set to full-stop mode, exposures are displayed in tenth-stop increments with a repeat accuracy of +/- 0.1 EV.
Reflected readings capture at a light receiving angle of about 40-degrees, or slightly wider than the viewing field of a normal lens. For incident readings, a small, built-in Lumisphere slides over the silicon diode sensor. For flat-field incident readings, a Lumidisc (included) snaps over the sensor for metering flat artwork or measuring contrast and/or exposure ratios within a scene. Electronic flash exposures can be taken with or without a PC cord.
Exposure data is displayed on the LCD screen, which has been redesigned to emulate the look and feel of the LCD on the ‘bigger-brother' Sekonic L-358 flash meter. Exposure data and related information is displayed using large type and easy-to-read icons. At ISO 100 ambient light can be read over an EV range of 0 to 19.9 in both incident and reflected mode. Flash exposures are displayed from f/1.4 to f/90.9 (or about f/124). ISO sensitivity is set from 3 to 8000 in third-stop increments. For cinema applications, the L-308S can be programmed to display exposure times from 8 to 128 frames-per-second.
The Sekonic L-308S FLASHMATE comes with a Lumidisc (with pouch), a soft case, strap, synchro terminal cap and a AA battery .
| Type: |
Digital exposure meter for ambient and flash light |
| Light receiving method: |
Incident light and reflected light |
|
|
| Incident light: |
Convertible to flat diffuser (Lumisphere slides to expose Lumidisc) |
| Reflected light: |
Light receiving angle 40° (Lumigrid) |
| Light receptor element: |
Silicon photo diode |
Metering modes
| Ambient light: |
Shutter priority metering EV metering |
| Flash: |
With synchro cord Without synchro cord |
Measuring Range (ISO 100)
| Ambient light: |
Incident light EV 0 to EV 19.9 Reflected light EV 0 to EV 19.9 (with 40° Lumigrid) |
| Flash: |
Incident light f/1.4 to f/90.9 (approx. f/124) Reflected light f/1.4 to f/90.9 (approx. f/124) with 40° Lumigrid |
| Repeat Accuracy: |
+/- 0.1 EV or less |
| Calibration Constant |
| Incident light metering: |
|
Lumisphere C = 340 |
| |
|
Lumidisc C = 250 |
| Reflected light metering: |
|
K = 12.5 |
|
Display Range
| Film speed: |
ISO 3 to 8000 (in 1/3 steps) |
| Shutter Speeds |
Ambient light: 60 sec |
-
0 stars
No reviews have been written yet
-
-
Nobody has asked a question about this Product yet
-